|
Custom Machined OEM 61 tooth pulley
Custom machined OEM 61 tooth rear drive pulley for tube framed bikes.
Give you bike a custom look and reduced weight. Removes almost 1/2 lb of rotating mass. This pulley starts out as a used OEM pulley which is them sandblasted, machined, and then powder-coated HD wrinkle black. It is then re-machined to give the high-lighted chamfer. CORE RETURN: Return a usable pulley for a $45 refund. $165.00
Machining Service of your current pulley
Send in your current pulley for this machine operation.
$85.00
Powder-Coat Service
$50.00
|
|
Lightweight Front Drive Pulley Remove almost a 1/2 lb of mass from your front drive pulley. Send in your 27 T front drive pulley and you will receive it back, machined, sand blasted, and powdercoated black.
Machining Service of your current pulley
$85.00
|
|
Hidden Brembo rear caliper bracket
If you are looking to go one step further with your XB wheel conversion, we now offer a custom billet caliper bracket that works with our XB wheel spacers. This bracket comes with a Brembo P32 two piston black caliper. The bracket rotates the caliper behind the swingarm making it hidden and out of sight which cleans up the appearance of the bike and swing arm. For 99+ aluminum swing arms only.
$255.00
|
|
X1 / S1 Billet shifter
Replace your sloppy boomerang style or cast 2001+ shifter with this billet aluminum shifter. Machined from 6061 aluminum and rides and a ball bearing. Improves with clean precise shifting. Includes Shifter with replaceable knurled toe peg, mounting block, shifter linkage and hardware. Match with our billet brake lever for a complete set-up.
$260.00
|
|
X1 / S1 Billet brake pedal
|
|
S3 / M2 Billet shifter
|
|
S3 / M2 Billet brake pedal
|
|
X1 frame plug
The "original" X1 frame plug. Made from ABS plastic with a stainless steel threaded insert. This fits into the large home on the clutch side of the frame to create a 1/4-20 threaded hole. This is used when removed the original airbox and scoop when installing aftermarket carbon fiber under tank inserts. Makes for a clean and simple install. Includes your choice of Natural stainless bolts or BLACK stainless steel bolts and black nylon washers.
$19.50
|
Engine mount to head bolts
|
These bolts and washers are used to bolt the front engine mount to the heads on a tube framed bike. These bolts are rated stronger then Grade 8 hardware at 180,000 psi. Since these bolts are under high stress they should not be reused. Replace every so often to prevent breakage and head damage. Includes 2 bolts, 2 washers and install instructions.
|
$22.95
|
ARP Exhaust flange studs and nuts
Upgrade your rusted, damaged, or broken exhaust flange studs to strong ARP stainless. This studs have a unique ball end for easy lead in and will not rust.
$39.95
|
|
2001+ shifter replacement bronze bushings
Replace your worn out plastic OEM shifter bushings with these oil impregnated long lasting bronze bushings. For 2001+ style shifter that mounts to the primary case.
$14.95
|
|
|
|
|
|
American Flag domed decals
Add these domed American Flag decals to the sides of your American Motorcycle. These measure 1.250" x 0.750" and are coated in a domed polyurethane. Roughly the same size as the flag decals on the sides of an EBR motorcycle.
$12.95
|
|
Fuel cap o-ring
Replacement fuel cap o-ring. Fuel resistance Vitron.
$7.50
|
|
Fuel cap flange bolts
Replacement stainless steel bolts for fuel cap flange. Set of 8.
$25.95
|
|
Amsoil V-Twin 20w-50 engine oil
Fully Synthetic V-Twin 20w-50 oil. Advanced multi-functional. Excellent in air-cooled motorcycle engines due to high heat resistance. Can be used in both and primary.
|
|
Amsoil oil filter
Amsoil EAOM134 oil filter. Available in Black or Chrome
|
*Not all parts are in stock at all times. Parts are sold on a first-come, first served basis.
Copyright 2017 © MC MOTO-WORX USA . All rights reserved.
Copyright 2017 © MC MOTO-WORX USA . All rights reserved.
